Before connection
7
How to avoid damages
Do not under any circumstances connect or disconnect equip-
ment when power is turned on. The design of the RCA plug
generates a huge transient when inserted. Connecting or dis-
connecting equipment with the power on can result in severe
damage to both speaker and amplifi er.
How to avoid noise problems
The V3.0 contains delicate circuits that are sensitive to mag-
netic strayfi elds. The unit should not be placed near mains
transformers, TV sets etc. Care should be taken regarding
placement of the interconnect cables. Do not run interconnect
cables in parallel with mains cords or speaker cables. Keep
interconnect and speaker cables as short as possible.
How to avoid antenna problems
In some set-ups hum may occur when you connect the radio,
VCR or TV to your system. The problem is caused by DC
voltage coming from your antenna. Please contact your cable
network operator.
Unpacking the V3.0
Immediately upon receipt of the V3.0, inspect the carton
for possible damage during shipment. The carton and pac-
kaging have been designed to provide the safest possible
protection for the transport of your amplifi er. Unpack the unit
carefully. Save all packaging materials for future shipment.
The contents of the carton
1 pcs ABRAHAMSEN
©
V3.0
1 pcs AC mains cord
1 pcs Owners manual
1 pcs Spare fuse
(located in the fuse drawer, mains inlet. See page 11)
If any of the items mentioned above are not included in the
carton, please contact your authorized ABRAHAMSEN
©
dealer, distributor, or ECS Holding AS for assistance.
Setup procedure
Before connecting the V3.0 to the mains, check that the
mains voltage indicated on the rear panel corresponds to
the line voltage in the territory you intend to use the unit.
