Overview
THEREMIN PLAYER KIT
ABRA ELECTRONICS
Designed by Andre /Vanier College
QTY
PCB#
Item
Description
ABRA #
1
N/A
Printed Circuit Board
Theremin Sound PCB
BRD-THEREMIN
1
C1
Capacitor
10UF 16V Electrolytic Capacitor
CD104
1
C2
Capacitor
0.1 UF Ceramic Capacitor (104 CODE)
10R16
1
N/A
Connector, Battery
9 Volt Battery Clip Connector
29-130
3
IC2
IC
CMOS 555 Timer
LM555
1
Pushbutton
Pushbutton
MOM. Pushbutton
PBS-175
1
Photocell
Photocell
5mm Photocell 5k Light 200m Dark
PHOTO-340
1
R1
Resistor
1/4 Watt Resistor 4.7k OHM (Yellow, Violet, Red)
R1/4-4.7K
2
Speaker
Jumper Wire
4 Inch Jumper Wires for Speaker
JW-75-4
1
Speaker
Speaker
8 OHM 0.5W 2 Inch Speaker
SPK-120
The THEREMIN PLAYER KIT produces fun squawk box sound effects. Sounds change depending on the closeness of hands or
fingers to the photocell sensor.
The kit is suitable for beginners, even if you have never soldered before. You can find soldering instructions on the ABRA
website under SOLDER-KIT.
Soldering is made easier on a high quality printed circuit board with solder mask on both sides to prevent solder shorts and
a clear silk screened parts layout to identify where the parts are to be inserted.
Tools Required
•
Pencil type soldering iron
•
Solder
•
Diagonal Cutters
Parts List
1
