Abra AK-320, Руководство пользователя

Страница: 6 / 12

6
To begin the assembly process,
insert the LM393 as shown in the
photo.
Ensure the notch of the Integrated
Circuit aligns with the markings on
the board, also known as the
silkscreen.
All soldering will be done on the
backside of the board.
You may proceed to solder the resistors in
place by following the numbering on the
board and placing the correct color resistor
indicated in the “Bill of Materials” section
on page 3.
It is recommended to solder and cut of the
excess lead with a flush cutter, one resistor
at a time.