AbodeFit WalkSlim 610, Руководство пользователя

Страница: 10 / 18

EN
10
STARTING THE WALKSLIM 610 USING THE TOUCHSCREEN DISPLAY
1. Attach the power cord to the treadmill and plug into dedicated power outlet
2. Attach safety key to the yellow position and attach safety clip onto your clothing
3. Check the stability and function of the treadmill by standing on the Footrail, hold the
handle with one hand and with the other hand press the Start/Stop button on the
touchscreen display .
4. The treadmill will now be on and start up in a delay of 3 seconds and run at a speed of
1.0km/h. Press “Speed +” and motor speed will rise to reach a speed of 2.5-3.5km/h
(this is the most comfortable speed for running). Hold the handles with both hands
and step on the tread belt with both feet successively. You will reach the same speed
with the tread .
HOW TO STOP
In an emergency, hold the handles tightly with both hands
and step off the tread belt onto the footrails. Activate the
Emergency Stop machanism by pulling out the Safety Key
from the insert. This will safely disconnect the treadmill
and the motor will immediately stop running. The LED
Display screen will display “E07”and the buzzer will bi-bi-
bi three times. The Treadmill will only start up again if the
Safety Key is inserted back in.
POWER SAVING MODE
The WalkSlim 610 will enter power saving mode if there is no keystroke command within
10 minutes. In this standby power saving mode, the display will automatically turn off. It
can be woken up when any key is pressed.
Please carefully consider your physical conditions when starting to use this product for training, and keep training properly and
regularly to ensure that you have enough physical strength to exercise. Inappropriate or excessive training will not benefit your
health.
03 Guidance for initial Operation
07 08
5. Connect the power supply
and turn on the switch.
8. Start to use the treadmill.
Noisy level is 65dB(A).
The treadmill has an emergency stop mechanism for your safety. Before starting
your training, attach the safety key to your clothing. If the treadmill was switched
off due to the safety key being pulled out, insert it again. The continuous belt
does not start up again automatically.
Uncontrolled use of the treadmill by a third party can be avoided by taking the
safety key off and storing it in a secure place.
In an emergency, hold the handrails tightly with both hands and step off of the
belt onto the side surfaces of the side platforms. Activate the emergency stop
mechanism (safety disconnect).
4. Check if the handrail is locked. 3. Rotate the handrail in the direction of arrows while
holding the lockup button below the handrail.
7. Open APP homepage, add the
device by "+" in the upper right
corner of the page, and complete
the phone binding according to the
prompt.
6. Search "KS RECORD" App from
Apple Store or Android Google
Play and complete installation.
1. Remove the machine from the package, and
place the machine on a level surface.
2. Lift the column of the machine
from the side of the machine.
KS RECORD