Important Technical Data
Whilst every effort has been made to make these instructions comprehensive they may not be exhaustive, and
we strongly recommend that this product is installed by a skilled professional. This will ensure the best possible
finished installation.
This product is made from 304 grade stainless steel for the greatest possible durability, after the end of the
lifecycle of this product it should be recycled responsibly.
Earth bonding: under current IEE regulations there is no statutory requirement to earth bond sinks as most new
wiring installations are protected with an RCD. If you are unsure whether your wiring is protected by an RCD,
contact a qualified electrician.
Maximum temperature 300°C* Note: If this temperature is exceeded, even for short periods, damage to the
finish can result.
Waste disposers should be mounted in such a way that the weight of the unit is supported by the kitchen
cabinet carcass, not just the sink. Faulty or damaged waste disposal units can cause vibration – this will
damage the sink and can loosen connecting pipework or fixings causing water leaks.
All Abode products are designed in accordance with recognised European or global standards. Please ensure
that your Abode product is fitted in accordance with localised legislation.
The installation should be periodically checked for damage to water sealing parts as described in the
instructions to avoid accidental water damage.
Abode is a registered trademark of Abode. All errors and omissions excepted.
A full technical specification and copies of these instructions are available for this product on our website.
www.abodedesigns.co.uk
Manufacturers Product Reference
©Abode
AX4045 v1 - 02/2019
Unit L, Zenith Park, Whaley Road, Barnsley, S75 1HT.
Tel: 01226 283434 Fax: 01226 282434
www.abodedesigns.co.uk
All errors and omissions excepted.
Please retain these instructions with the sink for future reference
Norcros Group (Holdings) Ltd
Ladyfield House
Station Road,
Wilmslow
Cheshire
SK9 1BU
Production year: See label
Abode DoP
Product code: See label
Preparation of food, washing of
dishes and discharge of
domestic wastewater.
EN 13310
CA - DA
Stainless Steel Undermount/Inset Sink
10 Year Warranty
Terms and Conditions
In the unlikely event that you should experience any
defect in the materials or workmanship of your new
Abode sink within 10 years of purchase, the
manufacturer will repair or replace all or any part of the
product that is defective, at their discretion. The
manufacturer will not be responsible for any other
consequential costs such as labour, removal or
reinstallation of the sink or any other connected or
related products.
This is provided that the product has been used for
normal domestic purposes in the UK & Eire, and that the
care, installation and maintenance instructions have
been observed. The warranty extends to the original
purchaser only. You should retain a copy of your dated
invoice as proof of purchase to validate any claims
under this guarantee.
Please note that this product is manufactured using
natural materials so slight shade variations can occur.
Marks, scuffs and scratches caused during installation or
accidental damage are not covered by this guarantee.
Neither are stains, discolouration or corrosion or any
damage or defect caused by incorrect installation or
abuse of the product.
We are continuously improving and developing our
range of products, finishes & colours. Therefore, in the
event of a valid claim, we may not be able to provide an
identical replacement for the defective product
throughout the guarantee period. Where an identical
product is no longer available, we will supply the nearest
equivalent from our then current product range. In
assessing your claim, we must be given the opportunity to
inspect the product as installed prior to removal. Any
product returned to us must be securely packaged and
adequately insured. We will not accept responsibility for
any damage caused during transportation.
No installer, dealer, agent or employee of Abode has the
authority to modify the obligations or limitations of this
warranty. This warranty does not affect your statutory
rights.
Care Instructions for your Kitchen Sink
To maintain the appearance of this product, ensure that it is regularly cleaned using only a clean, soft damp
cloth. A solution of warm water and a mild liquid non-antibacterial detergent may be used where necessary,
and then the product rinsed thoroughly and wiped dry. Any other cleaning action will invalidate your warranty.
No household or industrial chemicals should come into contact with this product to prevent damage.
No metallic objects should be left in contact with this sink as they may cause corrosion by close contact.
Prolonged exposure to acidic or alcoholic drinks or foodstuffs may also cause corrosion.
Do not cut, slice or chop directly onto the sink as this mark the surface finish. Avoid the use of plastic washing
up bowls, engrained grit on the bowl underside may mark the surface finish. Avoid impacting the product with
sharp or heavy objects such as knives, pans or cooking pots and also avoid contact with abrasives.
For further care and maintenance advice on removing stubborn marks and more examples of objects or
actions likely to artificially shorten the life of this product, please visit our website.
Please retain these instructions with the sink for future reference
