Parts and Contents
Key
Description
Qty
A
Sink
1
B
Connecting
pipework &
overflow
1
C
Care instructions
& fitting
information
1
D
Basket strainer
waste(s)
1
Installation Instructions
Preparation
1.
Take great care when handling this sink, whilst every effort has been taken to remove sharp edges, the
material by nature may be sharp. We recommend wearing gloves accordingly. Do not lift the product
by the waste hole(s) or tap hole(s). We recommend 2 people should be used to handle this product.
2.
Check the package for completeness, possible defects or any transport damage before installation
commences. Installed faulty product will not be honoured by the warranty.
3.
Check that the supporting carcass and worktop is level left to right and front to back to ensure correct
drainage of water.
4.
Check that the surrounding furniture is the correct size and shape to accept this product and that no
plumbing or wiring may foul the installation.
a.
All ceramic products should be supported under the reverse face with a substantial braced
shelf similar to the example below. The shelf should be designed to allow for small adjustments in
height at each corner and so that it could be disassembled from the underside in the event that
the sink is accidentally damaged. Alternately a special Belfast sink carcass can be used.
b.
The height of the shelf should be such that when the sink is placed on the shelf the top face rim
of the sink is level with the underside face of the worktop, see example below.
Key
Description
A
Surrounding cupboards or end panels
B
Hole for waste connections
C
Supporting shelf
(moisture resistant timber or similar, ensure
framework sits directly under the product)
D
Incoming hot and cold supply pipes
E
Supporting uprights (front & back)
5.
If replacing an existing sink, remove this product and clean the surrounding area, ensure the new sink
will suit the existing cut out size and position, otherwise amend the cut out size accordingly.
6.
Collect the tools you will need to complete this installation. Typically this might include a sprit level,
pencil, straight edge, set square, jigsaw, chopsaw, and a drill with screwdriver bits amongst others.
b
a
c
b
a
c
d
e
d
