10
Using your food processor
Tool/Attachment
Function
Recommended
Speed
Maximum
Capacity
Chopping blade
Chopping e.g.
meat
1
300g meat
Mixing blade
Mixing e.g. dough
1
400g flour + 240g
water
Double sided disk
Slicing/grating
1
1 litre mark
Jug with blade
Blending e.g. fruit
into liquids
2
1.5 litre mark
Attachment guide for use
Now that you understand how to put together your food processor and your
ingredients are prepared, you are ready for use.
To use the food processor bowl, attach the drive shaft and bowl according to
instructions on page 7.
Fit the required attachment based on your desired function, using the table
at the top of this page as a guide. Again, the instructions for assembling
food processor attachments can be found on page 8.
Once the accessory is attached, secure the lid according to page 7.
With the food processor bowl attached and
secured, remove the food pusher from the feeding
chute if it is placed in there. With the speed
control dial set to ‘0’, plug the food processor into
a suitable outlet and make sure it switched on.
