Abocom WR5503, Руководство пользователя

Страница: 67 / 74

Chapter 4:
PC Configuration
64
•
Use the "Deactivate" and "Activate" buttons, if available.
•
OR, restart your system.
Other Unix Systems
To access the Internet via the Wireless Router:
•
Ensure the "Gateway" field for your network card is set to the IP Address of the Wireless Router.
•
Ensure your DNS (Name Server) settings are correct.
Wireless Station Configuration
•
This section applies to all wireless stations (client end) wishing to use the Wireless Router as an
access point, regardless of the operating system that is used on the client.
•
To use the Wireless Router, each wireless station must have compatible settings, as following:
Mode The mode must be set to Infrastructure .
SSID (ESSID)
(Extended Service Set
Identifier)
The network name must match the value used on the Wireless Router.
Note! The SSID (service set identifier) is case- sensitive.
Disable
If there is no security is enabled on the Wireless Router, the security of
each station should be disabled as well. And, you can connect the
Wireless Router without security, but it is NOT recommended.
WEP
Open System/ Shared
Key/ Auto
By default, WEP on the Wireless Router is disabled.
Shared Key only supports WEP as encryption method.
AUTO(Open/Shared) means AP can accept STA connect to it using
OPEN-WEP or SHARED-WEP.
•
If WEP remains disabled on the Wireless Router, all stations must
have WEP disabled.
•
If WEP is enabled on the Wireless Router, each station must use the
same settings as the Wireless Router.
Personal (Pre-Shared
Key)
WPA
WPA2
WPA2-Mixed
WPA-PSK(TKIP/AES)/ WPA2-PSK(TKIP/AES): If one of these
securities is enabled on the Wireless Router. To make a connection,
each station must use the same algorithms and pass phrase as the
Wireless Router.
Pre-Shared Key Format: There are two formats for choice to set the
Pre-shared key, Passphrase and Hex (64 characters) . If Hex is
selected, users will have to enter 64 characters string at a time. For
easier configuration, the
Passphrase (at least 8 characters) format is
recommended.
Pre-Shared Key : Pre-Shared Key serves as a password. Users may key
in 8 to 63 characters string if you selected passphrase. Pre-shared key
format to set the passwords or leave it blank, in which the 802.1x
Authentication will be activated. Make sure the same password is used