Abocom WR5502, Руководство пользователя

Страница: 12 / 63

Chapter 3: Configuration via Web
Overview
This chapter describes the setup procedure for:
•
Internet Access
•
LAN configuration
•
Wireless setup
•
Assigning a password to protect the configuration data
PCs on your local LAN may also require configuration. For details, see Chapter 4 - PC Con-
figuration .
Other configuration may also be required, depending on which features and functions of the
Wireless Router you wish to use. Use the table below to locate detailed instructions for the
required functions.
Configuration Program
The Wireless Router contains a HTTP server. This enables you to connect to it, and configure
it, using your Web Browser.
Your Browser must support JavaScript .
The configuration program has been tested on the following browsers:
•
Netscape V4.08 or later
•
Internet Explorer V4 or later
Preparations
Before attempting to configure the Wireless Router, please ensure that:
•
Your PC can establish a physical connection to the Wireless Router. The PC and the
Wireless Router must be directly connected (using the Hub ports on the Wireless Router)
or on the same LAN segment.
•
The Wireless Router must be installed and powered ON.
•
If the Wireless Router's default IP Address (192.168.1.254) is already used by another
device, the other device must be turned OFF until the Wireless Router is allocated a new
IP Address during configuration.
Using UPnP
If your Windows system supports UPnP, an icon for the Wireless Router will appear in the
system tray, notifying you that a new network device has been found, and offering to create a
new desktop shortcut to the newly-discovered device.
•
Unless you intend to change the IP Address of the Wireless Router, you can accept the
desktop shortcut.
•
Whether you accept the desktop shortcut or not, you can always find UPnP devices in My
Network Places (previously called Network Neighborhood ).
•
Double - click the icon for the Wireless Router (either on the Desktop, or in My Network
Places ) to start the configuration. Refer to the following section Setup Wizard for details
of the initial configuration process.