Windows 98 Installation
1. Connect the rectangular end of the USB cable
into the USB host port of your computer, and
the square end into the USB port of your
network adapter. Windows 98 will
automatically detect the device. Click
Next
to continue.
2. Select
Search for the best driver for your
device (Recommended)
and click
Next.
3. Insert the device driver into your CD-ROM
drive. Select
Specify a location
, direct
Windows 98 to the location where the driver
stored and click
Next.
Windows 98 will
search for the suitable driver for the software
installation need.
4. Click
Next.
Windows 98 will start copying
necessary files onto your system.
5. Click
Next.
6. Select the switch protocol that your telephone
company uses and click
Next.
7. Enter the telephone numbers that your ISP
provided and click
Next.
8. Click
Finish.
9. When asked to supply the original Windows
98 CD-ROM, you need to insert it into your
compact disc drive. Click
OK.
10. Click
Finish
to complete the software
installation.
11. To verify if your network adapter exists in
your computer and well enabled, you can
perform the following steps.
- 4 -
