- 5-
Quick Setup
WebUI Configuration example
STEP 1:
Connect both the Administrator’s PC and the LAN port of the Multi-Homing
Dual WAN Firewall Router to a hub or switch. Make sure there is a link light
on the hub/switch for both connections. The Multi-Homing Dual WAN Firewall
Router has an embedded web server used for management and
configuration. Use a web browser to display the configurations of the
Multi-Homing (such as Internet Explorer 4(or above) or Netscape 4.0(or
above) with full java script support). The default IP address of the
Multi-Homing is
192.168.1.1
with a subnet mask of 255.255.255.0. Therefore,
the IP address of the Administrator PC must be in the range between
192.168.1.2 /24– 192.168.1.254/24.
If the company’s LAN IP Address is not subnet of 192.168.1.0, (i.e. LAN IP
Address is 172.16.0.1) the Administrator must change his/her PC IP address
to be within the same range of the LAN subnet (i.e. 192.168.0.0). Reboot
the PC if necessary.
By default, the Multi-Homing Dual WAN Firewall Router Multi-Homing is
shipped with its DHCP Server function enabled. This means the client
computers on the LAN network including the Administrator PC can set their
TCP/IP settings to automatically obtain an IP address from the Multi-Homing
Dual WAN Firewall Router.
The following table is a list of private IP addresses. These addresses may
not be used as a WAN 1 IP address.
10.0.0.0 ~ 10.255.255.255
172.16.0.0 ~ 172.31.255.255
192.168.0.0 ~ 192.168.255.255
