ABM International CLSR-ST, Руководство по обслуживанию

Страница: 9 / 269

CLSR-ST: V1.0
Section 4.0 – Troubleshooting guide
This section is included to help diagnose and solve any problems that may occur with the
CLSR-ST. ABM has done its best to include as much information as possible. However,
not all problems are listed, therefore ABM asks that whenever a problem occurs you
contact a service technician at our home office. To reach service dial 281-443-4440 and
ask for a service technician, they are on call 24 hours a day, seven days a week.
4.1 Electrical Power
The CLSR-ST runs on a 10 amp, 220VAC single phase supply line.
4.2 Verifying Inputs and Outputs
The CLSR-ST performs all of its functions through the foot pedal and operator interface
on the sewhead. Consult the sewhead manuals for instructions on input and output
control.
4.3 Pneumatic systems
The CLSR-ST does not contain any pneumatic systems installed at the factory.
4.4 Troubleshooting notes
A few blank pages are provided so that you and your personnel can keep records and
notes of machine problems. By using this section and keeping it attached to the manual,
you will always have your own personalized quick reference repair section.