第3页 共10页
1
Instructions
1.1
Switch-on preparation
1、
Please read the
"Safety Warnings and Precautions"
carefully before turning on the
machine and make sure that all the relevant matters mentioned are implemented!
2
、
First, select a flat ground, open the tripod, adjust the length of the three support brackets, so that
the bubble in the top of the tripod level is in the right center position.
3
、
Take out the equipment from the box, and setit up on top of the tripod, and lock the quick release
knob.
4
、
Please check carefully whether the equipment and the external output and input connection
lines are correctly installed and connected before powering on.
5
、
According to the need to install accessories, such as line controller, image finder mirror, SD card,
battery or adapter.
6
、
Hold the antenna upright and do not block the 4G antenna position with metal objects.
Note: SD cards shall not be hot-swapped.
1.2
Device Operation
Signal output
Audio output
；
The device has a pickup function. Can be input through the microphone,
playback the recording through headphone.
