15
15
Operating Instructions
6.7. Telephone calls using the Sero Telephone
Number Dialing for the Pilot Pro:
1. Switch on: Set the slide switch on the left side of your Pilot to position
ON
and press
one of the red function keys briefly.
2. Say “Telephone” then say “Number.“
3. Say the first digit. Pilot repeats this and sends an IR digit to the telephone.
4. Repeat step 3 for the rest of the digits. If Pilot misunderstands a digit or you make a
mistake with the number say the command “back” until you get to the incorrect number
and repeat. If you want to completely terminate the dialing process say “cancel” or “exit”.
5. Once your numbers are correct on the telephone display say “Dial.“ The Sero
Telephone dials the number and the Pilot Pro switches to the Sleep Mode to avoid
receiving unintended commands during the phone call.
6. To terminate the call say “Wake up“ - “Hang Up”
Speed Dial for the Pilot Pro:
If in the command menu you have assigned names to the (Name 1 to 6) speed dials
proceed as follows to dial these numbers.
1. Switch on: Set the slide switch on the left side of your Pilot to position
ON
and
press one of the red function keys briefly.
2. Say “Telephone” and the name of the person you have voice recorded. Sero
Telephone speed dials that name and the Pro is automatically put to sleep. You
can speed dial up to six (6) names in the Sero Telephone.
3. To hang up the call say ‘Wake Up” and then “Hang Up”.
Directory Dial in the Pilot Pro:
1. Say “Telephone” then say “Directory”. This brings up the Directory on the Sero
Telephone. You can say “Up” or “Down” to move around the Directory. When the
number you want to dial is on the display say “Dial.”
