www.ablmobility.de
Albert-Büttner-Straße 11
D-91207 Lauf / Pegnitz
Phone +49 (0) 9123 188-0
Fax +49 (0) 9123 188-188
ABL SURSUM
Bayerische Elektrozubehör GmbH & Co. KG
1
1V0002 EXTERNAL CONTROL UNIT
Quick Start Guide, current 03/2020, Article number: 0301673_E_b
Thank you for choosing the 1V0002 external control unit by ABL!
• Please read this quick start guide carefully.
• Please also consider the information and safety notices provided in the installation and operating
manuals for the Wallboxes eMH2 and eMH3 by ABL.
• Please visit
www.ablmobility.de / Service / Downloads
to download the detailed installation and
operating manuals.
• Please affix the type plate included near the 1V0002 control unit as mandated.
Components included
1 x 1V0002 external control unit
The 1V0002 has four pre-drilled holes (
∅
7 mm) for mounting at the installation site. Fasteners (screws, wall
plugs etc.) are not included with the 1V0002. These must be supplied by the installation contractor.
Mechanical and electrical installation
During the installation, the circuit breaker for the supply line must be switched off in the house distribution.
Tools and materials required:
Pozidriv screwdriver, wire stripper, crimping tool
1
Attach the 1V0002 control unit using the DIN rail at the chosen installation site.
2
Strip the wires of the supply line, put ferrules on the wires and crimp on the ferrules (tools: wire stripper, crimp tool)
3
Operate the spring loaded mechanism of the PE terminal and clamp the
PE
protective earth conductor onto it.
4
Insert the
L
and
N
conductors of the power supply cable into the RCCB terminals and screw down hand-tight
(tool: Pozidriv screwdriver).
Conductor colour*
Connector RCCB
Description
Brown
L
Phase 1 current-carrying conductor
Blue
N
Neutral
Green-Yellow
PE
Protective earth
* Colour-coding is not internationally standardised and may therefore vary
The electronic components of your wallbox will be damaged if a voltage above 250 V is applied between the
current-carrying conductor
L
and the neutral conductor
N
.
This step concludes the installation of the 1V0002.
All manuals and user guides at all-guides.com
