7
Operation Instructions to MP3
1
）
Connect the lines properly according to the above connection diagram, plug in the power, and turn on
power
2
）
switch on the front panel. Under the default condition and after the switch-on, this equipment will play
the
3
）
program which was played prior to the previous switch-off. For example, if the raio program was being
played
4
）
prior to the previous switch-off, the radio program will be played automatically after this switch-on. In
order to
5
）
play MP3 program, please press the “MP3/TUNE” playing operation button or “SELETCOR” key for
switching.
6
）
1. To play MP3 program
7
）
1) Start playing: Switch to MP3 playing state by the above way (If MP3 program is being played, such
8
）
operation is omitted), plug the U-disc storing MP3 program into USB interface, and the equipment start
9
）
playing automatically. Make use of the 14 buttons on the panel of the equipment to select the program
to
10
）
be played and to control the suspension of playing.
11
）
2) U/SD: The MP3 player built in this equipment is able to play the program from USB interface or to
12
）
playthe program from SD interface. This equipment will select the program on the memory plugged
13
）
finally to play. For example, it is playing the program from USB interface, and then plug SD card into
the
14
）
equipment, and it is switched automatically to play the MP3 program on SD card.
15
）
2. To play tuner radio program
16
）
Switch to “TUNE” playing mode by the above way, and then start to play the radio program.
17
）
1) To search radio station:
18
）
Make use of the button on the panel of the equipment to search automatically from the low-
19
）
frequency range to high-frequency range, and the searched radio stations will be stored to the
20
）
storage number starting from 1 in order so as to facilitate the direct invoking of the radio station in
21
）
the future.
22
）
2) Invoking of radio station: The channel of radio station searched and stored automatically will be
23
）
invoked directly for playing in the future. Make use of hte “ or ” button on the panel of
24
）
the equipment to select the storage number in order to invoke the radio station for playing.
Note
：
If the U-disc is not plugged into this equipment prior to startup, the radio program will be played
automatically after the startup. At this moment, plug in the U-disc, and it will be switched to MP3 playing
state.