manualshive.com logo in svg

Abit WI-1P, Руководство пользователя

Поделиться
Скачать
Abit WI-1P Скачать руководство пользователя страница 38

3-6 Chapter 

3 

 

IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave, IDE 
Channel 3 Master, IDE Channel 4 Master: 

Click <Enter> key to enter its submenu: 

 

NOTE:

 Item “IDE Channel 3 Master” and “IDE Channel 4 Master” appears only 

when the item “OnChip Serial ATA” in the “OnChip IDE Device” menu is set as 
[Enhanced Mode], and the item “OnChip Serial ATA Mode” in the “OnChip IDE 
Device” menu is set as [IDE]. 

IDE HDD Auto-Detection: 

This item allows you to detect the parameters of IDE drives by pressing <Enter> key. 
The parameters will be shown on the screen automatically. 

IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave, Extended IDE Drive: 

When set to [Auto], the BIOS will automatically check what kind of IDE drive you 
are using. If you want

 

to define your own drive by yourself, set it to [Manual] and 

make sure you fully understand the meaning of the parameters. Please refer to the 
instruction manual provided by the device’s manufacturer to get the setting right. 

Access Mode: 

This item selects the mode to access your IDE devices. Leave this item to its default 
[Auto] setting to detect the access mode of your HDD automatically. 

WI-1P 

Содержание WI-1P









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды