3-22 Chapter
3
USB Resume from S3 (Disabled)
When set to Enabled, the system power will resume the system from a power saving
mode if there is any USB port activity.
VGA (OFF)
When set to On, the system power will resume the system from a power saving mode
if there is any VGA activity.
LPT & COM (LPT/COM)
When this item is enabled, the system will restart the power-saving timeout counters
when any activity is detected on the serial ports, or the parallel port.
HDD & FDD (ON)
When this item is enabled, the system will restart the power-saving timeout counters
when any activity is detected on the hard disk drive or the floppy diskette drive.
PCI Master (OFF)
When set to Off, any PCI device set as the Master will not power on the system.
PowerOn by PCI Card (Enabled)
Use this item to enable PCI activity to wakeup the system from a power saving mode.
Modem Ring Resume (Disabled)
Use this item to enable modem activity to wakeup the system from a power saving
mode.
RTC Alarm Resume (Disabled)
When set to Enabled, additional fields become available and you can set the date (day
of the month), hour, minute and second to turn on your system. When set to 0 (zero)
for the day of the month, the alarm will power on your system every day at the
specified time.
VA-20
