BIOS Setup
3-11
AGP Driving Value
This item selects a value for the AGP Driving control. Leave this item to its default
setting.
AGP Fast Write:
Select [Enabled] to support the AGP Fast Write function if your AGP card supports
this function.
AGP Master 1 WS Write:
This item implements a single delay when writing to the AGP Bus. When set to
[Enabled], two-wait states are used by the system, allowing for greater stability.
AGP Master 1 WS Read:
This item implements a single delay when reading to the AGP Bus. When set to
[Enabled], two-wait states are used by the system, allowing for greater stability.
AGP 3.0 Calibration cycle
Leave this item to its default [Enabled] setting to support AGP 3.0 calibration cycle
operations.
VGA Share Memory Size
This item selects the amount of main memory that is pre-allocated to support the
Internal Graphics device.
CPU Direct Access FB
Leave this item to its default [Enabled] setting to allow the CPU to access direct frame
buffer for integrated AGP. This will help in increasing performance.
User’s Manual
