Abit NF8 Pro Скачать руководство пользователя страница 33

Страница: 33 / 72

BIOS Setup

3-7

Head:

This item configures the numbers of read/write heads.

Precomp:

This item displays the number of cylinders at which to change the write timing.

Landing Zone:

This item displays the number of cylinders specified as the landing zone for the read/write heads.

Sector:

This item configures the numbers of sectors per track.

Back to Standard CMOS Features Setup Menu:

Drive A & Drive B:

This item sets the type of floppy drives (usually only Drive A) installed.

Floppy 3 Mode Support:

This item allows you to use “3 Mode Floppy Drive” in Japanese computer system by selecting drive A, B,
or both. Leave this item to its default [Disabled] setting if you are not using this Japanese standard floppy
drive.

Video:

This item selects the type of video adapter used for the primary system monitor.

[EGA/VGA]:

(Enhanced Graphics Adapter/Video Graphics Array) For EGA, VGA, SVGA and PGA

monitor adapters.

[CGA 40]:

(Color Graphics Adapter) Power up in 40-column mode.

[CGA 80]:

(Color Graphics Adapter) Power up in 80-column mode.

[Mono]:

(Monochrome adapter) Includes high-resolution monochrome adapters.

Halt On:

This item determines whether the system stops if an error is detected during system boot-up.

[All Errors]:

The system-boot will stop whenever the BIOS detect a non-fatal error.

[No Errors]:

The system-boot will not stop for any error detected.

[All, But Keyboard]:

The system-boot will stop for all errors except a keyboard error.

[All, But Diskette]:

The system-boot will stop for all errors except a diskette error.

[All, But Disk/Key]:

The system-boot will stop for all errors except a diskette or keyboard error.

User’s Manual

Содержание NF8 Pro









































































Результаты поиска

Содержание NF8 Pro

Отзывы:

Похожие инструкции для NF8 Pro

Бренды по названию

Популярные бренды

Abit NF8 Pro, Руководство пользователя

Результаты поиска

Содержание NF8 Pro

Отзывы:

Похожие инструкции для NF8 Pro

Бренды по названию

Популярные бренды