Abit LM6E Pentium II, Руководство пользователя

Страница: 62 / 98

3-34 Chapter 3
Type your password. When complete, press <Enter>. The following
message is displayed:
“ Confirm Password: “
Type your password again. When complete, press <Enter>. The password
setting is completed.
Password clearing procedure:
When you select the Password setting option, the following message
is displayed:
“ Enter Password: “
Press <Enter>, the message “Password Disable” is displayed. Press a key.
The password clearing procedure is completed.
Notice:
Do not forget your password. If you forget it, you will have to
open the computer case, clear the contents of the CMOS, and
boot the system up again. By doing this, you must reset all
your parameters.
(10) IDE Hard Disk Detection
After you have installed the hard disk, in old systems, you had to know
the hard disk specifications, such as the number of cylinders, heads and sectors,
and to enter the relevant information into the hard disk information section. If
the CMOS data was erased, and you had forgotten the hard disk specifications,
it was a great problem. But now, you can use this option to auto detect the
hard disk type and specifications, and the BIOS will automatically detect all
the relevant information and place them in the Hard Disk data section of the
Standard CMOS Setup Menu, in order to allow you to use your hard disk.