manualshive.com logo in svg

Abit KW7-G, Руководство пользователя, Страница: 30 / 72

Поделиться
Скачать
Abit KW7-G Скачать руководство пользователя страница 30

3-6 

Chapter 3 

Head: 

This item configures the numbers of read/write heads. 

Precomp: 

This item displays the number of cylinders at which to change the write timing. 

Landing Zone: 

This item displays the number of cylinders specified as the landing zone for the read/write heads. 

Sector: 

This item configures the numbers of sectors per track. 

 

Back to Standard CMOS Features Setup Menu: 

Drive A & Drive B: 

This item sets the type of floppy drives (usually only Drive A) installed. 

Video: 

This item selects the type of video adapter used for the primary system monitor. 

[EGA/VGA]:

 (Enhanced Graphics Adapter/Video Graphics Array) For EGA, VGA, SVGA and PGA 

monitor adapters. 

[CGA 40]:

 (Color Graphics Adapter) Power up in 40-column mode. 

[CGA 80]:

 (Color Graphics Adapter) Power up in 80-column mode. 

[Mono]:

 (Monochrome adapter) Includes high-resolution monochrome adapters. 

Halt On: 

This item determines whether the system stops if an error is detected during system boot-up. 

[All Errors]:

 The system-boot will stop whenever the BIOS detect a non-fatal error. 

[No Errors]:

 The system-boot will not stop for any error detected. 

[All, But Keyboard]:

 The system-boot will stop for all errors except a keyboard error. 

[All, But Diskette]:

 The system-boot will stop for all errors except a diskette error. 

[All, But Disk/Key]:

 The system-boot will stop for all errors except a diskette or keyboard error. 

Base Memory: 

This item displays the amount of base memory installed in the system. The value of the base memory is 
typically 640K for system with 640K or more memory size installed on the motherboard. 

Extended Memory: 

This item displays the amount of extended memory detected during system boot-up. 

Total Memory: 

This item displays the total memory available in the system. 

KW7 Series 

Содержание KW7-G









































































Отзывы:

Нет отзывов