Abit KR7A-133R, Руководство пользователя, Страница: 24 / 104

Chapter 2
KR7A-133/KR7A-133R
2-14
PN1 (Pin 1-2-3): Power LED Headers
There is a specific orientation for pins 1 through 3. Insert the three-threaded power LED cable to pins 1~3.
Check to make sure the correct pins go to the correct connectors on the motherboard. If you install them
in the wrong direction, the power LED light will not illuminate correctly.
Note:
Watch the power LED pin position and orientation.
PN1 (Pin 6-7): HDD LED Header
Attach the cable from the case’s front panel HDD LED to this header. If you install it in the wrong
direction, the LED light will not illuminate correctly.
Note: Watch the HDD LED pin position and the orientation.
PN1 (Pin 8-9): Power on Switch Header
Attach the cable from the case’s front panel power switch to this header.
PN1 (Pin 10-11): Hardware Suspend Switch (SMI Switch) Header
Attach the cable from the case’s front panel suspend switch (if there is one) to this header. Use this switch
to enable/disable the power management function by hardware.
PN2 (Pin 1-2): Hardware Reset Switch Header
Attach the cable from the case’s front panel Reset switch to this header. Press and hold the reset button
for at least one second to reset the system.
PN2 (Pin 4-5-6-7): Speaker Header
Attach the cable from the system speaker to this header.
PN2 (Pin 9-10): Suspend LED Header
Insert the two-threaded suspend LED cable into pin 9 and pin 10. If you install it in the wrong direction,
the LED light will not illuminate correctly.
Note: Watch the Suspend LED pin position and the orientation. For pin count-name list for PN1 and PN2,
please refer to table 2-2.
For the PN1 and PN2 pin’s count-name list, please refer to table 2-2.