background image

 

Boot Up NumLock Status 

This item determines the default state of the numeric keypad at system booting up. 

[On]:

 The numeric keypad functions as number keys. 

[Off]:

 The numeric keypad functions as arrow keys. 

Security Option 

This item determines when the system will prompt for password - every time the system boots 
or only when it enters the BIOS setup. 

[Setup]: 

The password is required only when accessing the BIOS Setup. 

[System]: 

The password is required each time the computer boots up.

   

To disable security, select 

Set Password

 at main menu and then you will be asked to enter the 

password. Do not type anything and just press the 

<Enter>

 key and it will disable security. 

Once security is disabled, the system will boot and you can enter the 

BIOS setup menu

 freely. 

※ 

Don’t forget your password. If you forget the password, you will have to open 
the computer case and clear all information in the CMOS before you can start up 
the system. But by doing this, you will have to reset all previously set options. 

MPS Version Ctrl For OS 

This item specifies which version of MPS (Multi-Processor Specification) this motherboard will 
use. Leave this item at its default setting. 

Delay For HDD(Secs) 

This item allows the BIOS to support some old or special IDE devices by prolonging this delay 
time. A larger value will give more delay time to the device for which to initialize and to prepare 
for activation. 

Full Screen LOGO Show 

This item determines if the full screen logo is shown when booting. 

3-8 

KN9 SLI, KN9 Ultra, KN9S 

Содержание KN9 SLI









































































Отзывы: