Abit KN8 ULTRA Скачать руководство пользователя страница 47

Страница: 47 / 72

BIOS Setup

KN8 Ultra-SOTES, KN8 Ultra, KN8

3-17

USB Mouse Support:

This item allows you to select [

Enabled

] for using USB mouse in DOS environment, or

[

Disabled

] in OS environment.

OnChip Audio Controller:

This option enables or disables the audio controller.

OnChip LAN Controller:

This option enables or disables the LAN controller.

Onboard LAN Boot ROM:

This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and
access the local area network directly.

Onboard FDC Controller:

Two options are available: Enabled and Disabled. The default setting is

Enabled

. You can

enable or disable the onboard FDC controller.

Onboard Serial Port 1:

(For model “KN8 Ultra” and “KN8” only)

This is used to specify the I/O address and IRQ of Serial Port 1. Six options are available:
Disabled

3F8/IRQ4

2F8/IRQ3

3E8/IRQ4

2E8/IRQ3

AUTO. The default setting is

3F8/IRQ4

Onboard Parallel Port:

(For model “KN8 Ultra” and “KN8” only)

Sets the I/O address and IRQ of the onboard parallel port. Four options are available: Disabled

378/IRQ7

278/IRQ5

3BC/IRQ7. Default setting is

378/IRQ7

Parallel Port Mode:

(For model “KN8 Ultra” and “KN8” only)

Four options are available: SPP

EPP

ECP

ECP+EPP. The default setting is

SPP

mode.

EPP Mode Select:

Two options are available: EPP1.7

EPP1.9. The default setting is

EPP 1.

7 When the mode

selected for the parallel port mode is EPP, the two EPP version options are available.

ECP Mode Use DMA:

Two options are available: 1

3. The default setting is

. When the mode selected for the

parallel port mode is ECP, the DMA channel selected can be Channel 1 or Channel 3.

IDE HDD Block Mode:

This item enables or disables the IDE HDD Block Mode.

Содержание KN8 ULTRA









































































Результаты поиска

Содержание KN8 ULTRA

Отзывы:

Похожие инструкции для KN8 ULTRA

Бренды по названию

Популярные бренды

Abit KN8 ULTRA, Руководство пользователя

Результаты поиска

Содержание KN8 ULTRA

Отзывы:

Похожие инструкции для KN8 ULTRA

Бренды по названию

Популярные бренды