Abit Hot Rod 100 Pro, Руководство пользователя

Страница: 47 / 54

Trouble Shooting (Need Assistance?) D-1
User’s Manual
Appendix D. Trouble Shooting (Need Assistance?)
Q & A
Q: May I use hard drives with different capacity or transfer mode?
A: In order to get optimized performance, we suggest using hard drives with the same
model.
Q: How to assign a booting device?
A: You may press <Ctrl><H> to assign a booting device in RAID BIOS (user’s manual
section 3-9).
Q: Why can’t I see correct capacity in FDISK utility?
A: It's a well-known issue of win95/98's FDISK utility. If an IBM 75GB hard disk DTLA
307075 only gets 7768MB in Win95/98’s FDISK utility, please contact Microsoft for a
latest version of FDISK utility or download IBM's Disk Manager DiskGo! 2.5 to fix it.
For windows 2000, there is no such a 64GB issue.
http://www.storage.ibm.com/techsup/hddtech/welcome.htm
Q: How to create a striping and mirror array (RAID 0+1)?
A: You need four drives (Appendix A), every two of them on the same channel/cable build
a striping array. Then create a mirror array by these two striping arrays (Appendix A-3).
(i) Press <Ctrl> <H> to setup configuration
(ii) Choose item 1 to Create RAID.
(iii) Choose item 1 to set Array Mode as Striping and Mirror (RAID 0+1).
(iv) Choose item 2 to Select Disk Drives. There are two striping arrays built
automatically and you only have to enter twice.
(v) Choose item 4 to Start Creation Process.
(vi) Press <Esc> to finish setting and leave RAID BIOS.
Q: How to rebuild a mirror array when one of the drives corrupts?
A: You need to delete previous array setting, duplicate the data, then rebuild a new array
setting (user’s manual 3-5).