Abit GD8 Pro, Руководство пользователя

Страница: 40 / 64

3-16 Chapter 3
!
Resume by USB From S3:
When set to [Enabled], this item allows you to use a USB device to wake up a system that is in the S3
(STR - Suspend To RAM) state. This item can be configured only if the item “ACPI Suspend Type” is set
to [S3(STR)].
Power Button Function:
This item selects the method of powering off your system:
[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system. This will
prevent the system from powering off in case you accidentally hit or pushed the power button.
[Instant-Off]: Pressing and then releasing the power button at once will immediately power off the
system.
CPU THRM-Throttling
This item controls the CPU speed by cutting down its regular power to a percentage during the STR
(Suspend To RAM) state.
Wake-Up by PME# of PCI:
Two options are available: Disabled or Enabled. The default setting is Disabled . When set to Enabled ,
any event affecting from PCI card (PME) will awaken a system that has powered down.
Wake-Up by Onboard LAN:
When set to [Enabled], you can remotely wake up a PC in Soft-Off condition via a LAN card that support
the wake up function.
Wake-Up by Alarm:
When set to [ Enabled ], you can set the date and time you would like the Soft-Off PC to power-on in the
“ Date (of Month) Alarm ” and “ Time (hh:mm:ss) Alarm ” items. However, if the system is being
accessed by incoming calls or the network (Resume On Ring/LAN) prior to the date and time set in these
items, the system will give priority to the incoming calls or network instead.
!
Date (of Month) Alarm
[0]: This option power-on the system everyday according to the time set in the “Time (hh:mm:ss) Alarm”
item.
[1-31]: This option selects a date you would like the system to power-on. The system will power-on on
the date set, and the time set in the “Time (hh:mm:ss) Alarm” item.
! Time (hh:mm:ss) Alarm
This item sets the time you would like the system to power-on.
GD8 Pro