manualshive.com logo in svg

Abit Fatal1ty AA8XE, Руководство пользователя, Страница: 25 / 88

Поделиться
Скачать
Abit Fatal1ty AA8XE Скачать руководство пользователя страница 25

Hardware Setup 

2-15 

(8).  Front Panel Switches & Indicators Headers 

This header is used for connecting switches and LED indicators on the chassis front panel. 

Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below 
stands for positive polarity for the LED connection. Please pay attention to connect these headers. A 
wrong orientation will only cause the LED not lighting, but a wrong connection of the switches could 
cause system malfunction. 

     

 

• 

HLED (Pin 1, 3): 

Connects to the HDD LED cable of chassis front panel. 

• 

RST (Pin 5, 7): 

Connects to the Reset Switch cable of chassis front panel. 

• 

SPKR (Pin 13, 15, 17, 19): 

Connects to the System Speaker cable of chassis. 

• 

SLED (Pin 2, 4): 

Connects to the Suspend LED cable (if there is one) of chassis front panel. 

• 

PWR (Pin 6, 8): 

Connects to the Power Switch cable of chassis front panel. 

• 

PLED (Pin 16, 18, 20): 

Connects to the Power LED cable of chassis front panel. 

 

User’s Manual 

Содержание Fatal1ty AA8XE

























































































Отзывы:

Нет отзывов