Abit BD7-E, Руководство пользователя

Страница: 47 / 72

BIOS Setup 3-13
Suspend Mode = 1 Min.
HDD Power Down = 1 Min.
Suspend Mode/HDD Power Down:
These two items will be enable to change setting when item Power Management is set to User Define,
theses two item will also changes as table 3-1 below.
Table 3-1: Power Management Settings
Power Management Settings
Items
User Define Min Saving Max Saving
Suspend Mode
Disabled 1 Min 2 Min 4 Min 8 Min
12 Min 20 Min 30 Min 40 Min 1
Hour. The default setting is Disabled .
1 Hour 1 Min
HDD Power Down
Disabled 1 Min 2 Min 3 Min 4 Min
5 Min 6 Min 7 Min 8 Min 9 Hour
10 Min 11 Min 12 Min 13 Min 14
Min 15 Min. The default setting is
Disabled
.
15 Min 1 Min
Video Off Method:
Three video off methods are available: “Blank Screen”, “V/H SYNC + Blank” and “DPMS”. The default
is “
V/H SYNC+Blank ”.
If this setting does not shut off the screen, select “Blank Screen”. If your monitor and video card support
DMPS standard, select “DPMS”.
•
Blank Screen: This option only writes blanks to the video buffer.
•
V/H SYNC + Blank: This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
•
DPMS: Initial display power management signaling.
Video Off In Suspend:
Two options are available: Yes or No. The default setting is Yes . This item determines the manner in
which the monitor is blanked.
Suspend Type:
Two options are available: Stop Grant and PwrOn Suspend. The default setting is
Stop Grant
.
Modem Use IRQ:
You can specify the IRQ for modem use. Eight options are available: NA 3 4 5 7 9 10
11. The default setting is NA .
Soft-off by PWR-BTTN:
Two options are available: Instant-off and Delay 4 Sec.. The default setting is Instant-off . Pressing the
power button for more than four seconds forces the system to enter the Soft-Off state when the system has
“hung”.
User’s Manual