manualshive.com logo in svg

Abit AW8, Руководство пользователя, Страница: 49 / 80

Поделиться
Скачать
Abit AW8 Скачать руководство пользователя страница 49

BIOS Setup 

3-21 

ACPI Suspend Type: 

This item selects the type of Suspend mode. 

[S1(PowerOn-Suspend)]:

 Enables the Power On Suspend function. 

[S3(Suspend-To-RAM)]:

 Enables the Suspend to RAM function. 

! 

Resume by USB From S3: 

When set to [Enabled], this item allows you to use a USB device to wake up a system that is in the S3 
(STR - Suspend To RAM) state. This item can be configured only if the item “ACPI Suspend Type” is set 
to [S3(STR)]. 

Power Button Function: 

This item selects the method of powering off your system: 

[Delay 4 Sec.]:

 Pushing the power button for more than 4 seconds will power off the system. This will 

prevent the system from powering off in case you accidentally hit or pushed the power button. 

[Instant-Off]: 

Pressing and then releasing the power button at once will immediately power off the 

system. 

WakeUp by PME# of PCI: 

When set to [Enabled], access to the onboard LAN or a PCI card such as a modem or LAN card will 
cause the system to wake up. The PCI card must support the wake up function. 

WakeUp by Ring: 

Two options are available: Disabled or Enabled. The default setting is 

Disabled

. When set to 

Enabled

, 

any event affecting from Modem Ring will awaken a system that has powered down. 

WakeUp by Alarm: 

When set to [

Enabled

], you can set the date and time you would like the Soft-Off PC to power-on in the 

“

Date (of Month) Alarm

” and “

Time (hh:mm:ss) Alarm

” items. However, if the system is being 

accessed by incoming calls or the network (Resume On Ring/LAN) prior to the date and time set in these 
items, the system will give priority to the incoming calls or network instead. 

! 

Date (of Month) Alarm 

[0]:

 This option power-on the system everyday according to the time set in the “Time (hh:mm:ss) Alarm” 

item. 

[1-31]:

 This option selects a date you would like the system to power-on. The system will power-on on 

the date set, and the time set in the “Time (hh:mm:ss) Alarm” item. 

! 

Time (hh:mm:ss) Alarm 

This item sets the time you would like the system to power-on. 

User’s Manual 

Содержание AW8

















































































Отзывы:

Нет отзывов