Abit AS8 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 80

background image

3-22

Chapter 3

ACPI Suspend Type:

This item selects the type of Suspend mode.

[S1(PowerOn Suspend)]:

Enables the Power On Suspend function.

[S3(Suspend To RAM)]:

Enables the Suspend to RAM function.

Resume by USB From S3:

When set to [Enabled], this item allows you to use a USB device to wake up a system that is in the S3
(STR - Suspend To RAM) state. This item can be configured only if the item “ACPI Suspend Type” is set
to [S3(STR)].

POWER ON Function:

This item selects the way you want your system to power on.

[Password]:

Use a password to power on the system, select this option then press <Enter>. Enter your

password. You can enter up to 5 characters. Type in exactly the same password to confirm, and then press
<Enter>.

[Hot KEY]:

Use any of the function keys between <F1> to <F12> to power on the system.

[Mouse Left]:

Double click the mouse left button to power on the system.

[Mouse Right]:

Double click the mouse right button to power on the system.

[Any KEY]:

Use any keyboard keys to power on the system.

[Button Only]:

Use only the power button to power on the system.

[Keyboard 98]:

Use the power-on button on the “Keyboard 98” compatible keyboard to power on the

system.

NOTE:

To enable this “Power On” function, the wake-up header of [PS2-PWR1], [USB-PWR1],

[USB-PWR2] must be set to [Enabled] position. Please refer to the configuration of “Wake-up Header”
[PS2-PWR1], [USB-PWR1], and [USB-PWR2] in section 2-4, chapter 2.

NOTE:

The mouse wake up function can only be used with the PS/2 mouse, not with the COM port or

USB type. Some PS/2 mice cannot wake up the system because of compatible problems. If the specs of
your keyboard are too old, it may fail to power on.

KB Power ON Password:

This item sets the password required in order to power on your computer.

NOTE:

Do not forget your password, or you will have to clear the CMOS and reset all parameters in

order to utilize this function again.

Hot Key Power ON:

This item powers on the system by pressing <Ctrl> key plus one of each function key (<F1> ~ <F12>)
simultaneously.

Restore On AC Power Loss:

This item selects the system action after an AC power failure.

[Power Off]:

When power returns after an AC power failure, the system’s power remains off. You must

AS8 Series

«
...
46
47
48
49
50
...
»

Содержание AS8

















































































Отзывы:

Нет отзывов

Похожие инструкции для AS8

Бренд: Zotac Страницы: 56

Бренд: JETWAY Страницы: 52

STEVAL-ISB042V1

Бренд: ST Страницы: 26

Бренд: Biostar Страницы: 56

Бренд: Albatron Страницы: 57

Бренд: BESTEK Страницы: 13

Бренд: Linear Technology Страницы: 6

Бренд: Renesas Страницы: 2

Бренд: Gigabyte Страницы: 74

Бренд: Texas Instruments Страницы: 7

Бренд: Linear Technology Страницы: 8

Digital Alpha VME 4/224

Бренд: DEC Страницы: 442

Бренд: Silicon Laboratories Страницы: 12

Бренд: AXIOMTEK Страницы: 72

Бренд: Advantech Страницы: 124

Бренд: Portwell Страницы: 63

Бренд: Portwell Страницы: 66

Бренд: Portwell Страницы: 55

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды