Abit AN52, Руководство пользователя

Страница: 51 / 80

Driver & Utility
AN52S/AN52 3-27
3.8 SATA RAID Driver (for Windows Vista)
The Raid Driver needed when installing Windows Vista operating system is located at the
following path of your CD-ROM drive after placing the “Driver-&-Utility CD” into it:
For Vista 32bit
CD-ROM Drive:\Drivers\SATARAID\MCP65\Vista32
For Vista 64bit CD-ROM Drive:\Drivers\SATARAID\MCP65\Vista64
3.9 SATA RAID Driver (for Windows XP, 2003, or 2000)
The “Driver Disk Maker” program bundled in the Driver-&-Utility CD is a utility to build the driver
program needed for SATA controller into a floppy disk under DOS environment. This procedure
is necessary only for installing Windows operating system to the hard disk connected to
“
SATA1~SATA4 ” connector.
To create a driver disk Under DOS Environment:
1. Before starting, connect a 3.5” floppy disk drive to the “ FDC1 ” connector, and connect a
CD-ROM drive to your motherboard. Prepare a 3.5” floppy disk.
2. After completing all the start-up preparation for hardware setup, power on the system.
3. Enter the BIOS Setup Menu by hitting < Del > key 1 .
Enter and select the BIOS menu “ Advanced BIOS Features ”. Configure the option
“ First Boot Device ” to “ CD-ROM ”
2
drive. Save this selection and exit BIOS setup menu
by accessing the BIOS menu “ Save & Exit Setup ”.
4. Restart the system. The system will now boot from CD, and enter the ABIT Boot Manager,
the following options appear
3
:
(0) Boot From First HDD
(1) Make Driver Disk
(2) Boot From First Floppy Drive
(3) Skip CD-ROM Boot (Try Next Boot Device)
Type < 1 > and hit < Enter > key. The following options appear:
(1) Make Driver Disk
(2) Exit
Type < 1 > and hit < Enter > key to start making.
5. The driver options appear:
(1) NVRaid Floppy Disk for WinXP_2K_2003 (32bit)
(2) NVRaid Floppy Disk for WinXP_2003 (64bit)
Type the number of the actions you want and hit < Enter > key.
6. Insert floppy disk to the floppy drive
4
. Press any key to continue.
7. Copying files to floppy now starts. After completed copying, hit the < n > key if you do not
want to make another Driver Disk, and stop at the A:\> prompt.
8. Take out the Driver-&-Utility CD from the CD-ROM drive now. Restart your system
5
.
1
You may refer to the chapter “ BIOS Setup Menu ” in user’s manual on how to do so.
2
The name may vary as per BIOS version. Place the “Driver-&-Utility CD” into the CD-ROM drive now.
3
You will have to type your command within 20 seconds, or the system will boot from HD.
4
You will be asked to do the format procedure if the floppy disk is not blank. Hit < n > key for not formatting
another floppy.
5
Now you have this driver disk ready for installing Windows Operating System. Insert this floppy disk to
floppy drive and press < F6 > key when the screen instruction prompts you to install a third-party SCSI or
RAID driver.