manualshive.com logo in svg

Abit AI7-G, Руководство пользователя, Страница: 66 / 96

Поделиться
Скачать
Abit AI7-G Скачать руководство пользователя страница 66

3-24 

Chapter 3 

 

FanEQ Control: 

Click <Enter> key to enter its submenu: 

 

CPU FanEQ Control: 

When set to [Enabled], this item allows you to control the CPU fan speed by its setting combination of 
temperature and voltage high/low limit. 

 

CPU Temperature 

This item displays the CPU temperature. 

 

FanEQ Control Temp. High / Low 

This item sets the high and low temperature limit that you want to do the fan speed control. 

 

FanEQ DC Fan Voltage High / Low 

This item sets the high and low voltage limit that you want to provide the fan with. 

NOTE:

 The value of high limit must be set above the one of low limit. 

NB FanEQ Control: 

When set to [Enabled], this item allows you to control the NB fan speed by its setting combination of 
temperature and voltage high/low limit. 

 

System Temperature 

This item displays the system temperature. 

 

FanEQ Control Temp. High / Low 

This item sets the high and low temperature limit that you want to do the fan speed control. 

 

FanEQ DC Fan Voltage High / Low 

This item sets the high and low voltage limit that you want to provide the fan with. 

NOTE:

 The value of high limit must be set above the one of low limit. 

AI7/AI7-G 

Содержание AI7-G

































































































Отзывы:

Нет отзывов