BIOS Setup
A-S78H
2-1
2. BIOS Setup
This motherboard provides a programmable EEPROM so that you can update the BIOS utility.
The BIOS (Basic Input/Output System) is a program that deals with the basic level of
communication between processor and peripherals. Use the BIOS Setup program only when
installing motherboard, reconfiguring system, or prompted to “Run Setup”. This chapter
explains the Setup Utility of BIOS utility.
After powering up the system, the BIOS message appears on the screen, the memory count
begins, and then the following message appears on the screen:
PRESS DEL TO ENTER SETUP
If this message disappears before you respond, restart the system by pressing <Ctrl> + <Alt>
+ <Del> keys, or by pressing the Reset button on the computer chassis. Only when these two
methods fail should you restart the system by powering it off and then back on.
After pressing <Del> key, the main menu screen appears.
Phoenix – AwardBIOS CMOS Setup Utility
►
SoftMenu Setup
►
PC Health Status
►
Standard CMOS Features
Load Fail-Safe Defaults
►
Advanced BIOS Features
Load Optimized Defaults
►
Advanced Chipset Features
Set Password
►
Integrated Peripherals
Save & Exit Setup
►
Power Management Setup
Exit Without Saving
►
PnP/PCI Configurations
Esc: Quit
F10: Save & Exit Setup
: Select Item
(RS780-SB700-8A660A1AC-10) B06
Abit Over Frequency & Voltage ...
Smart RAM Status : No Exist
※
In order to increase system stability and performance, our engineering staff is
constantly improving the BIOS menu. The BIOS setup screens and descriptions
illustrated in this manual are for your reference only, and may not completely
match with what you see on your screen.
