Abilize ranger, Инструкция пользователя

Страница: 14 / 27

14
Function Buttons and Indicators:
1. Control Buttons - Hazard Light, Horn, Right Indicator, Headlight, Left Indicator,
Turtle(decelerate), H/L Speed, Rabbit(accelerate).
2. LED Indicators - Status Indicator (Green), Headlight Indicator (Green), Left / Right Indicators
(Green), High/Low Speed Indicator (Green).
3. Connector - 20PIN.
4. LCD Back Light - Blue LEDs illuminate while key on.
Function Descriptions:
5. Full Lighting Control
- Headlight , Tail light, Left/Right Indicator, Hazard Light, Brake Light.
6. Speedometer - 7 Segment display (2 1/2 1 decimal) “km/h” and “mph” symbol.
7. Digital High / Low Speed Control - Low (L) Speed: 1 - 5 Rate, High (H) Speed: 1 - 5 Rate.
8. Power Indicator - Battery charging indicator (6 segments).
9. Malfunction Messages - Error code: 1-7 (1 digit) + LED Indicator.
10. Key On Display
- LCD full segments display.
11. Warning Tone Setup - Volume adjustment for tones of Left/Right Indicator, Parking light,
Low voltage warning and horn.
Clock:
1. Timekeeping error per day - + 2 seconds.
2. Initial Display - Hour, Minute, Mode: AM 12:00.
3. Time Format (12 hours - AM/PM) - Press ‘Mode’ button and switch to clock mode.
Display range: AM12:00 - PM11:59.
HH display: The “0 of ten’s digit is invisible from 1 0’clock to 9 o’clock.
4. Setup Mode (Time Adjustment)
- Press + together for 3 seconds to enter setup mode.
While ‘HH’ is flashing, press to increase digits and to decrease digits. Press ‘Mode’ to
enter ‘MM’ setup mode when finished. (The same rule applies if ‘MM’ is flashing).
Press ( ) once to increase (decrease) one digit. The digits can increase (decrease)
accumulating when you press the buttons for more than 2 seconds. The display is cycling. It
takes 2 seconds to increase from 0 to 9 for each position.