background image

Before operation, please remove the lock nut and press the circuit breaker button (B) to 
activate the system. 
 
Function of parts: 
 
Main key switch (C)

•  Turn the key to the right to turn the scooter on. 

• 

Turn the key to the left to turn the scooter and

 

LED light on. 

•  Turn the key to the centre position to turn the  

scooter off.

 

CAUTION: Always ensure that the scooter is switched off before getting on or off the 
scooter and before removing any items from the scooter. 

CAUTION: Turning the scooter OFF whilst driving will bring the scooter to an abrupt stop. 
 
Speed dial knob (D) 

The rabbit icon indicates fast or high speed. The turtle icon indicates slow or low speed. By turning 

this knob (D) towards chosen icon you can control the overall speed of the scooter.

 

 
CAUTION: Before driving the scooter, set the speed to low speed by turning the knob 
towards turtle icon. 

CAUTION: Drive in high speed when you encounter an up slope, and drive in low speed 
when you encounter a down slope. 
 
Horn button (E) 

Press the horn button (E) once to sound warning tone when necessary.

 

 
Battery gauge (F) 

The LEDs represent an approximation of battery capacity. If the charge is full, all LEDs are lit. 

When only red and orange LEDs are lit, the batteries are consuming and should be charged soon. 
When only red LEDs are lit, charge the batteries immediately.

 

Self-diagnostic warning light (G) 

Flashing light indicates there is a problem with the scooter. See page 11 for more information.

 

Throttle (H) (H1)

To move forward pull the right side of the throttle (H). To move backward pull the left side of the 

throttle (H1). (The movement directions can be reversed by local dealers if required.) Release the 

throttle to engage automatic brake. This is also your accelerator. The further you pull it, the faster 

you go. (Subject to the position of the rabbit/turtle control).

 

 

CAUTION: Releasing the throttle engages the automatic brake, but will taxi for a short 
buffering distance. Please keep a safe distance when stopping to prevent any danger.

Instruction Booklet: Identification of  Parts

05

C

D

F & G

E

B

Nithsdale  

Wheelchairs

Содержание MS01073















Отзывы: