Ability VS18211, Быстрый старт

Страница: 13 / 28

AI IP Camera Quick Start Guide
Wall Mounting Installation
Step 1:
Confirm that the cable outlet on the wall is large enough for
the pigtails to pass through (size of hole size inserted here).
Affix the drilling sticker to the camera installation position
and ensure that the center of the sticker matches the cable
outlet on the wall.
Step 2:
Use a 5mm drill bit to drill four 35mm deep holes in the
positions marked by the drilling sticker. Use a hammer to
carefully drive the white plastic expansion tubes into the
holes.
Step 3:
Connect the external cabling to camera pigtails, insulate
the connections (see Cable Connections), and feed the
cabling through the cable entry on the wall. Fasten the
tapping screws. Make sure the cable outlet at the camera
base is installed facing downwards and is sealed with
waterproof glue or caulking to prevent water from getting
into the camera.