Ability AI-Vue VS6NLB0, Быстрый старт, Страница: 9 / 16

AI-Vue Camera Quick Start Guide
9
2.5 Cable connection
2.5.1 For safety precautions

The lightning arrester must be installed and grounded if you install camera outdoor.

Strong and weak current cables must be kept at least 5 cm apart from each other.
When connecting the cables to the device, take care to avoid connecting strong
current cables to weak current interfaces or you will damage your device.

The tail of cable must be cut if it cannot pass through the wall, please keep the label on
tail of cable. And please make sure to use insulating tape and waterproof tape to
insulate and waterproof all tail of cable to avoid short circuits and water leakage.

Wrap all pigtail cables in insulated, waterproof, rubber tape to prevent short circuits or
water damage.
2.5.2 Power
The wire can be up to 0.75mm² or 1.0mm² is required.
※
power cable installation