
29
Method three:
Enter a binary code. The binary code will always be associated with the
Code
-button
!
and it is
the same for all levels
. Make up your own binary code or use the
code already programmed in an IR receiver or transmitter.
There are two types of IR receivers: an older type of receiver where you set the code with a
12-pole switch, or a newer type where the IR receiver is programmable. The principle is the
same when it comes to creating the binary code.
Fig 3
shows a 12-pole switch. Switches 1,
4, 6 and 12 are in the
“On” position, the others are in the “Off” position.
1
2
3
4
5
6
7
8
9
10
11
12
2048 1024 512 256 128 64 32 16 8 4 2 1
On
Off
Fig 3
The following example describes how the binary code is created according to method three:
1. Press
P
and
!
at the same time. The indication lamp for the
Code
-button and the
current level are now lit.
2. Enter the code by pressing on
---
or
!
.
---
= switch in Off position and
!
= switch in On position.
Press twelve times in turn;
!
,
---
,
---
,
!
,
---
,
!
,
---
,
---
,
---
,
---
,
---
,
!
, (
Fig 3
).
3. When you have pressed twelve times the light for the
Level
-button flashes green to show
that the operation is finished.
The code is now programmed on the
!
-button. Make a note of the chosen code for
future usage.
Adding a 4096 code, method three
Press
P
+
!
,
press
---
or
!
12 times.
---
= Off position.
!
= On position.
Default setting: Random code