Abicor Binzel xFUME POWER 250, Оригинальная инструкция по эксплуатации

Страница: 39 / 72

xFUME POWER 250 1 Identification
EN - 3
11 Disassembly ............................................................................................................................... EN - 34
12 Disposal ....................................................................................................................................... EN - 35
12.1 Disposal of welding dust............................................................................................................... EN - 35
12.2 Disposal of materials ..................................................................................................................... EN - 35
12.3 Disposal of consumables .............................................................................................................. EN - 35
12.4 Packaging....................................................................................................................................... EN - 35
13 Warranty .................................................................................................................................... EN - 35
1 Identification
The xFUME
®
POWER 250 is a mobile power source with the integrated components fume extraction system
and wire feeder. It is used for manual MIG/MAG inert gas welding.
These operating instructions describe only the xFUME
®
POWER 250, which must only be operated with
original ABICOR BINZEL spare parts.
When used in these operating instructions, the terms “device”, “product” and “system” always refer to the
xFUME
®
POWER 250 welding power source.
The following figures show the device with an optional carriage. The standard model of the device comes
pre-mounted with an underbody and rubber feet.
The figures in these operating instructions may differ slightly from those for the actual product.
1.1 Marking
This product fulfils the requirements that apply to the market to which it has been introduced.
A corresponding marking has been affixed to the product, if required.