Abicor Binzel MF1-Rear, Руководство по эксплуатации

Страница: 31 / 76

MF1 rear 6 Putting into operation
EN - 13
6.4 Feeding in the wire
1
Lift off the cover
(3)
.
2 Press on the rocker (7) then rotate the eccentric bolt (8) and remove it upwards.
3
Fold away the rocker
(7)
to the side.
4 Insert the wire (4) from the wire drum or spool through the Masterliner (1) to the inlet tube (2) .
5
Swivel the rocker
(7)
into position, insert the eccentric bolt
(8)
and turn it over.
6 Press the inching trigger (6) until wire comes out of the MF1 (process-side wire drive).
NOTICE
• Each time you change the wire, make sure that the start of the wire is free of burrs.
1
Masterliner
2 Inlet tube
3
Cover
4 Wire
5
Masterliner
6 Inching trigger (green)
7
Rocker
8 Eccentric bolt
Fig. 5 Feeding in the wire
1
5
8 7
3
6
2 4
CAUTION
Risk of injury
Physical injury caused by the start of the wire.
• Keep the process-side drive away from the body.
NOTICE
• For further steps, please see the MF1 BAL.0135 operating instructions.