Abicor Binzel FEC, Руководство по эксплуатации, Страница: 52 / 124

EN - 22
9 Maintenance and cleaning FEC
9.5 Replacing the filter pad
1
Place a protective underlay (E) (fleece, cardboard, blanket, or similar) on the floor. Ensure it is large
enough for the area you want to protect.
2
Place the device with the rear side (F) on the protective underlay (E) .
3
Loosen the mounting screws (D) of the cover grille (C) with an Allen key AF5.
4
Remove the cover grille (C) .
5
Remove the filter pad (B) .
6
Dispose of the filter pad (B) in accordance with local regulations.
7
Insert the new filter pad and install the cover grille with a tightening torque of 7 Nm.
8
Insert the mounting screws (D) .
9
Tighten the mounting screws (D) with an AF5 Allen key.
10
Set the device upright.
11
Remove the protective underlay (E) .
9.6 Replacing the strap
1
Loosen the screw on the latch with an Allen key and remove it.
2
Remove the latch.
3
Remove the strap.
4
Insert the new strap.
5
Replace the latch.
6
Insert the screw and tighten it with an Allen key.
Fig. 5
Replacing the filter pad
A
Housing
B Filter pad
C
Cover grille
D
4× mounting screws
E Protective underlay
F
Rear of device
B
A
C
D
E F