Abicor Binzel AUT 61GD, Руководство по эксплуатации

Страница: 28 / 72

EN - 10
6 Putting into operation MAG welding torches
6.3 Mounting the machine side cable assembly
1 Combine central connector (10) and central socket (8) at the wire feed unit
(8) and secure them with the connecting nut (11) .
6.4 Connecting the cooling system
1
Cable assembly
2 Coolant return hose
3
Coolant flow hose
4 Re-circulating cooling unit
(only with liquid-cooled torches)
5
Wire basket spool
6 Shielding gas cylinder
7
Power supply
8 Wire feed unit
9
Central socket
10 Central connector
11
Connection nut
Fig. 3
Mounting the cable assembly on the machine side
1 2 3 4
5
6
7 9 11 8 10
NOTE
• Check once again whether the wire guide liner has been fastened
correctly.
WARNING
Risk of burns
MAG welding torches will become overheated if the coolant level is too low.
• Wear protective gloves.
• Check the coolant level at regular intervals.
NOTE
• Applies only to liquid-cooled MAG welding torches.
• Make sure that the coolant supply and return have been installed
properly. Coolant supply = blue, Coolant return = red