Abicor Binzel ADF 600S, Руководство по эксплуатации

Страница: 24 / 132

EN - 6
3 Product description ADF 600S
3 Product description
3.1 Technical data
WARNING
Hazards caused by improper use
If improperly used, the product can present risks to persons, animals and material property.
• Use the product according to its designated use only.
• Do not convert or modify the product to enhance its performance without authorisation.
• The product may only be used by qualified personnel (in Germany, see TRBS 1203).
CAUTION
Expiration date/service life is shortened
The expiration date/service life can be shortened as a result of usage, incorrect storage, environmental
conditions etc.
• Use and store the product according to its designated use only.
• Note the necessary ambient conditions for transport and storage.

Tab. 1 on page EN-6
Storage in a closed environment, ambient temperature
- 20 °C to + 70 °C (- 4 °F to 158 °F)
Operating temperature, shipping, ambient temperature - 5 °C to + 55 °C (23 °F to 131 °F)
Tab. 1 Ambient conditions for transport and storage
Optical class 1/2/1/2
Visual field
98x44 mm (3.86"x1.73")
Filter size 110x90 mm (4.33"x3.54"x0.35")
Arc sensor
2
Light stage DIN 4
Protection level
DIN 9 to DIN 13
Protection control External, variable protection
On/Off
Fully automatic
Sensitivity control Adjustable (low - high)
UV/IR protection
Up to protection level DIN 13, always
Power supply Solar cell; no need to change battery
Switching time
0.0625 ms from light to dark
Delay
0.25 to 0.30 s at <fast> position
0.65 to 0.80 s at <slow> position
Low current intensity TIG ≥ 10 A DC & AC
Grinding mode
Yes
Helmet material Impact-resistant nylon
Total weight
435 g
Helmet service life The normal service life is approx. 4 years. This depends on the welding process involved. The
manufacturer recommends that the helmet be replaced every 4 years.
Scope of application Electrode welding; TIG DC&AC; TIG pulse welding DC&AC; MIG/MAG;
MIG/MAG pulse welding; plasma cutting; plasma welding; gouging
Tab. 2 Technical data