Abicor Binzel ABIROB A Series, Руководство по эксплуатации

Страница: 36 / 112

EN - 14
6 Putting into operation ABIROB
®
A
6.3 Attaching the machine-side connector

Fig. 5 Setting up the cable assembly on page EN-13
Check once again whether the wire guide has been fitted correctly.
1 Join the central connector (4) and the central socket at the wire feeder and
secure them with the connection nut (6) .
2 Fasten the air-blast hose (5) to the air-blast and injection unit or the air-blast
valve. Seal the connector gas tight if the ‘air blast’ option is not used.
6.4 Connecting the control lead

Fig. 5 Setting up the cable assembly on page EN-13
The control lead (3) is open on the machine side. The customer must connect
a suitable plug. If all data are provided, the device can also be delivered ready
for connection. Otherwise, choose a compatible plug for your power source
and solder it to the corresponding leads according to the terminal diagram.
a = green, b = white, c = brown, d = yellow (insulated), e = grey (insulated), f = blue (insulated),
g = pink (insulated), h = black, i = purple, j = red (insulated)
Fig. 6 Connecting the control lead
a
WH
b
BN c
YE
d
GY
e
BU
f
PK
g
BK
h
VT
i
RD
j
GN