![background image](http://html1.mh-extra.com/html/abicor-binzel/abiplas-111-hf/abiplas-111-hf_operating-instructions-manual_451634057.webp)
BAL.0716.0 • 2022-01-11
EN
-
27
ABIPLAS
®
CUT HF
9 Maintenance and cleaning
9 Maintenance and cleaning
Scheduled maintenance and cleaning are prerequisites for a long service life and trouble-free
operation.
9.1 Cable assembly
1
Check that all threaded fittings are tight and inspect wear parts for visible damage. Replace
if necessary.
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the compressed air supply.
• Disconnect all electrical connections.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
WARNING
Risk of burns
The cutting torches reach very high temperatures during cutting.
• Allow the cutting torches to cool down.
• Wear the correct protective gloves.
NOTICE
• Always wear your personal protective equipment when performing maintenance and
cleaning work.
• Remove any adhering weld spatter.
• Ensure that all threaded fittings are tight.