DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material.
INSTALLATION GUIDE
Note: This product must be installed by a licensed plumber.
This is a general installation guide - there are many factors
that are involved that can alter the installation method.
This product install must comply with AS/NZS 3500.
INSTALLATION GUIDE
Note: This product must be installed by a licensed plumber.
This is a general installation guide - there are many factors that
are involved that can alter the installation method.
M
easu
re
G r u b S c r e w
S c r e w
M o u n t i n g
B r a c k e t
P l u g
4
5
6
2
3
Measure & mark desired position of the
rail on the wall.
Measure centre to centre, brass
fixing holes in rail.
Remove all mountings with the
supplied allen key.
Screw the mountings into the plugs.
Fit shower rail onto the mountings to
wall using the allen key.
Drill holes with masonry drill bit
& fit the plugs using a rubber mallet.
1
G r u b S c r e w
DO NOT use cream
cleaners or bleach.
These substances are
abrasive
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material
Regularly clean with
mild liquid detergent
or soap and water
You have the option to
have the handle to sit
either on the right or left
side. Rotate and install
to suit your preference.
IN THE BOX
1x Shower Rail
1x Allen Key
2 x Plugs
2 x Mounting Brackets
2 x Screws
2 x Grub Screws
