DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material.
INSTALLATION GUIDE
Note: This product must be installed by a licensed plumber.
This is a general installation guide - there are many factors
that are involved that can alter the installation method.
This product install must comply with AS/NZS 3500.
HOT
COLD
OFF
ON
H
C
Hot water hose
Cold water hose
O-ring
Plastic washer
Metal washer
Nut
Base ring
ø35mm
MAX35mm
MIXER OPERATION
Install the basin mixer by fixing the
washers, nut & screws on the underside
of the benchtop.
Mark hole in benchtop at desired positon and
drill a 35mm hole.
Installation should comply with relevant local
authority requirements.
This product must be installed by a qualified plumber.
INSTALLATION MANUAL
As shown in the figure, connect the H & C flexible hoses.
ABI recommends applying approriate lubricant to
o-rings
Attach the two flexible hoses to water
supply and hand tighten. Remove the
aerator from the spout and flush.
Re-install aerator
Hot water
Cold water
