Level
@ max 450mm centres.
Fixings into structure
Check the desired height of mirror cabinet
from floor.
Silicon top and sides of mirror cabinet if
necessary.
If correct height and position is suitable,
level the top of the mirror cabinet & mark
out desired position. Drill holes through the
back of mirror cabinet into structure within
wall using a wood drill bit.
Note: Ensure adequate fixings are fixed at
maximum 450 centres into structure
within wall.
ABI accepts no liability if vanity is not
correctly secured into wall structure or is
installed incorrectly.
1
2
3
DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
sur faces as this may
scratch the material.
INSTALLATION GUIDE
Note: This product must be installed by a licensed tradesperson.
This is a general installation guide - there are many factors
that are involved that can alter the installation method.
This product install must comply with the standards in your
respective countr y and must be adhered to by your licensed tradesperson.
