manualshive.com logo in svg

ABI Attachments Workman XL, Руководство пользователя, Страница: 15 / 28

Поделиться
Скачать
ABI Attachments Workman XL Скачать руководство пользователя страница 15

Call Toll Free: 

877-788-7253

Email: 

[email protected]

15

Fig 36B.

Fig 38B.

Fig 36A.

Fig 38A.

Fig 36C.

Fig 37.

Remove grommet from tongue 

and slide over big connector.

Optional Tongue 

Support Bracket.

Fig 31.

Fig 32.

Fig 33.

Tongue is upside down position 

since trailer is upside down.

Grommets on tongue 

and frame of trailer.

Fig 34.

Both Connectors from 

the tongue snap onto 

the connectors on the 

trailer frame only one 

way.

13. Push excess wiring back into the frame. There are 2 

ways to accomplish this - pushing the wire into the tongue 

or into the frame of the trailer.

There are grommets on both the tongue and frame to 

protect the wires from being damaged by the sharp metal 

edges (

Fig 35

).

To push the big connector into the tongue, pull the tongue 

grommet off the tongue and push it over the big grommet 

then work the big and small connectors inside the tongue 

and replace the grommet back onto the tongue. push the 

remaining wires into the frame of the trailer as you pull the 

tongue closer to the frame (

Fig 36

).

Fig 35.

Содержание Workman XL





























Отзывы:

Нет отзывов